Features

DWR-N2000M

1. Eliminate Wi-Fi Dead Zones

The primary advantage of this 300mbps Wi-Fi 4 repeater device is its ability to capture an existing wireless signal from your main router and rebroadcast it to areas your router cannot reach. It effectively eliminates "dead zones" in basements, upstairs bedrooms, or remote corners of a large house.

2. Cost-Effective Network Expansion

Compared to purchasing a new router or a mesh system, this 300mbps Wi-Fi 4 repeater offers a budget-friendly solution to improve connectivity. It extends the life of your current network setup without the need for expensive infrastructure upgrades.

3. Easy Setup & Universal Compatibility

Designed for convenience, this300mbps Wi-Fi 4 repeater typically features a WPS (Wi-Fi Protected Setup) button. With the push of a button, it syncs with your existing router automatically. It maintains full backward compatibility with all standard Wi-Fi devices (802.11 b/g/n), ensuring it works with older laptops, smartphones, and smart home devices.

4. Compact Plug-in Design

This 300mbps Wi-Fi 4 repeater feature a wall-plug design and external antennas. This saves valuable desk space and allows you to position the repeater precisely at the edge of your router's coverage area for optimal signal boosting.

Parameter

Description	Wi-Fi4 Repeater
Wireless Speed	300Mbps
Standard	802.11b/g/n
Frequency	2.4GHz
Transmission Power (Max)	20dbm
Interface	1*FE LAN
Antenna	2*3dbi fixed
WAN Mode	Repeater
System Spec	Feature and Technology Spec
Protocol	= IEEE 802.11b = IEEE 802.11g = IEEE 802.11n(2T2R 300mbps) = RFC768 User Datagram Protocol (UDP) = RFC791 Internet Protocol ( IP) = RFC792 Internet Control Message Protocol (ICMP) = RFC793 Transmission Control Protocol (TCP) = RFC826 Address Resolution Protocol (ARP) = RFC2131 Dynamic Host Configuration Protocol (DHCP)
System Support	Windows 98SE, Windows 2000, Windows ME, Windows XP 32/64 bit and Windows Vista 32/64bit
Modulation Schemes	Support 256/64/16/8-QAM, QPSK, BPSK, MCS0 ~ MCS15
Encryption	4/128 bit, WEP, WPA, and WPA2 wireless encryption
QoS	Non-support
SNMPv2 or v3	Non-support
Ethernet Interfaces	1 x RJ45 for 10/100 LAN Ethernet Port
LEDs	1xLED
Button	LED/Reset/Power
Consumption	4.5W
Environment Requirement
Operating Temperature	0ºC～45ºC
Storage Temperature	-20ºC～70ºC
Operating Humidity	10%～90%, non-condensing
Storage Humidity	5%～90%, non-condensing
Power Supply	Built-in Power Supply
EMC and Safety
Regulatory Compliance	CE
Safety Regulations	UL
Green Standard	RoHS
Physical Dimension
Physical Characteristics	L x W x H: 42 mm x 42 mm x 55 mm
Weight	40g

FAQ

Q: I can't access the internet after configuration, what should I do?

Answer: Log in to the router's web UI and check the router's connection status on the status page 。
● If your router has successfully connected to the internet, please try connecting your wireless device to the router's Wi-Fi network. Use the new Wi-Fi name and password. If a connection failure occurs on the page:
- Click on the WAN settings in the web UI to check if the connection type and parameters you entered are correct. And connect the Ethernet cable with internet connectivity directly to your computer.
● If your computer cannot access the internet, please consult your ISP. Otherwise, please reconnect the Ethernet cable with an internet connection. Go to the router, reset it, and reconfigure it.

Q: Why are all the indicators turned off?

Answer: Check the following content:
● The connection between the power adapter and the power outlet.
● The status of the power switch.