Name: China Customized 8 Port GPON OLT with 10G Uplink Manufacturers - Wholesale Service - Yingdakang
Brand: Dcom
SKU: 299043496

Features

WGL-B22408H

DCOM Technology 8 Port GPON OLT with 10G Uplink integrates with network security, supports data, voice and video, and provides continuous forwarding, graceful restarting and ring protection, improving the work efficiency and securing the maximum running time.

1. Key Interface

● This 8 Port GPON OLT with 10G Uplink GPON Capacity: Equipped with 8 fixed GPON ports. Each port features a downstream rate of 2.488 Gbps and an upstream rate of 1.244 Gbps, supporting a split ratio of up to 1:128. This enables a single device to serve hundreds of end-users (ONUs/ONTs).

● Uplink Connectivity: The system offers diverse uplink options to ensure flexible and redundant network integration:

● 2 x 10GE SFP+ Uplink: Dual 10-Gigabit Ethernet fiber ports for high-bandwidth backhaul, ensuring low latency and future-proof capacity.

● 2 x GE SFP Uplink: Two additional Gigabit Ethernet fiber ports for dedicated uplink or service redundancy.

● 4 x GE ETH (Copper) Uplink: Four fixed 10/100/1000BASE-T RJ45 ports for standard copper connectivity, allowing seamless integration with legacy network infrastructure or management networks.

2. Hardware Features

● This 8 Port GPON OLT with 10G Uplink Switching Fabric: Non-blocking architecture ensuring wire-speed forwarding across all ports.

● Redundancy: Supports dual power supply modules (AC/DC) and link aggregation (LACP) via the uplink interfaces for enhanced network reliability.

● Compliance: Fully compliant with ITU-T G.984/G.988 standards, ensuring interoperability with standard GPON ONUs from various vendors.

Parameter

Description	Optical Line Terminal (OLT)
Interface	210GE SFP+Uplink+2GE SFP+Uplink+4GE ETH Uplink+8GPON Port
Standard	GPON ITU-T G.984.x G988
PON port spec	SFP Class C+/C++ (Tx:1310nm, Rx1490nm) Receiving sensitivity:＜-30dBm(Saturation Optical-12dBm) Transmitting optical power:+3～+7dBm Transmission distance: 20KM.Max Splitting ratio 1:128 Upstream:2.488Gbps Downstream:1.244Gbps
Power Supply	2*hot swap Redundancy Power Module (DC+DC, DC+AC, AC+AC)
Lay3	Support static route, RIP v1/v2, OSFP V2, ARP proxy
Management Ports	110/100BASE-T out-band port, 1CONSOLE port
Management Mode	SNMP, Telnet, CLI, WEB
VLAN	VLAN tag/un-tag VLAN transparent transmission, VLAN translation and QinQ
IPV4/IPV6	yes

FAQ

Q: I can't access the internet after configuration, what should I do?

Answer: Log in to the router's web UI and check the router's connection status on the status page 。
● If your router has successfully connected to the internet, please try connecting your wireless device to the router's Wi-Fi network. Use the new Wi-Fi name and password. If a connection failure occurs on the page:
- Click on the WAN settings in the web UI to check if the connection type and parameters you entered are correct. And connect the Ethernet cable with internet connectivity directly to your computer.
● If your computer cannot access the internet, please consult your ISP. Otherwise, please reconnect the Ethernet cable with an internet connection. Go to the router, reset it, and reconfigure it.

Q: Why are all the indicators turned off?

Answer: Check the following content:
● The connection between the power adapter and the power outlet.
● The status of the power switch.

Hot Tags: 8 port gpon olt with 10g uplink, China 8 port gpon olt with 10g uplink manufacturers, 1U 16 Port GPON OLT, 8 Port GPON OLT With 10G Uplink, Fiber 4 Port GPON OLT, olt, xpon olt